Search found 78 matches

by ken60
Mon Dec 23, 2019 3:28 pm
Forum: Advanced Programming
Topic: Report Cloud to CAD fail can you tell me why ?
Replies: 7
Views: 485

Re: Report Cloud to CAD fail can you tell me why ?

Just make it simple this way, xyz value are location from part coordinate system and 3D value is for plus or minus material. In your case the actual value bigger than nominal value in positive direction from y0 there fore that location missing material
by ken60
Mon Dec 23, 2019 3:14 pm
Forum: Advanced Programming
Topic: Report Cloud to CAD fail can you tell me why ?
Replies: 7
Views: 485

Re: Report Cloud to CAD fail can you tell me why ?

Just make it simple this way, xyz value are location from part coordinate system and 3D value is for plus or minus material. In your case the y value bigger in y positive direction from y0 there fore that location missing material
by ken60
Wed Nov 27, 2019 4:26 pm
Forum: General Application Support
Topic: Cannot find Ref Probe or established tip files
Replies: 3
Views: 526

Re: Cannot find Ref Probe or established tip files

Code: Select all

 As I've suggested many times now, you should switch to new UCC Direct Driver 2.0. Ditching UCCserver will be the best thing since sliced bread
Is this for Ph10 Probe only or for Ph20 as well, thanks CrashN8
by ken60
Fri Nov 15, 2019 7:17 pm
Forum: Tip Calibration / Probe config
Topic: Probe Calibration
Replies: 1
Views: 469

Re: Probe Calibration

It sounds to me your physical probe assembly is not matching with the one defined in cmm manager, double check all components and verify total length
by ken60
Sat Nov 02, 2019 2:26 pm
Forum: PH20 / I++
Topic: migration
Replies: 2
Views: 475

Re: migration

I think I found the answer but have not try yet
https://cmmmanager.com/forum/viewtopic. ... 1561#p5596
by ken60
Sat Nov 02, 2019 12:11 pm
Forum: PH20 / I++
Topic: migration
Replies: 2
Views: 475

migration

Lately I have this error message when migrate a program to UCC machine running 3.7SP2, It works fine before. Thanks
Capture2.JPG
by ken60
Tue Oct 15, 2019 4:06 pm
Forum: PH20 / I++
Topic: CMM-Manager crash after change tool and component in UCC
Replies: 6
Views: 844

Re: CMM-Manager crash after change tool and component in UCC

I agree, but that is how the cmm been set when I start for this company. Just for update, I got help from Mike Davis at Renishawn to solve the problem it is working now and this time I have ref tool for calibration only. 1 question, how do I correct the probe tip to machine volume in real time? do I...
by ken60
Fri Oct 11, 2019 3:37 pm
Forum: PH20 / I++
Topic: CMM-Manager crash after change tool and component in UCC
Replies: 6
Views: 844

Re: CMM-Manager crash after change tool and component in UCC

Thank you CrashN8, CMM M 3.7SP2 and UCC version UCCserver 53000R1. Today I run CMM M 3.6 and it ran fine except it won't activate the Ref assy. (CMM M switch from other probe assy to Ref assy. without physical change Ref assy. in rack)...Also, when I mess around with probe assembly in UCC I accident...