Search found 20 matches

by jpo_031
Fri Jun 12, 2020 10:13 am
Forum: Tip Calibration / Probe config
Topic: Renishaw stylus compatibility
Replies: 2
Views: 570

Renishaw stylus compatibility

Hi there.
Do you know if Renishaw styli can be used with Zeiss
for example a Cylinder or a Star configuration system
by jpo_031
Wed Mar 27, 2019 2:30 pm
Forum: PH20 / I++
Topic: Head comunication with controller lost
Replies: 2
Views: 2566

Re: Head comunication with controller lost

Thanks for the tip.
It was a bad connection between the head as you mentioned, the root cause was a bad crash in the ph-20 head that the operator did not report (very common).
Thanks
by jpo_031
Mon Mar 04, 2019 2:40 pm
Forum: PH20 / I++
Topic: Head comunication with controller lost
Replies: 2
Views: 2566

Head comunication with controller lost

Hi there I wonder if anybody can help with this issue, I'm running a CMM 3coord with a ph20 head , the problems is that lately the machine keeps showing this error sometimes right when we open the program sometimes while is running Error (3,1000"{4999}) Error (3,1000{5067} The head has lost its refe...
by jpo_031
Mon Oct 29, 2018 10:02 am
Forum: Alignments
Topic: Alignment error in XY - using Cylinder Probe
Replies: 3
Views: 3050

Re: Alignment error in XY - using Cylinder Probe

I checked the stylus on the comparator , also I tried on another CMM (DCC) and works fine so I've restrained one of the parts to make sure it is perpendicular to the head and it did better but not perfect the problem still but the difference is smaller only .007 to .011", , I assume this is related ...
by jpo_031
Mon Oct 22, 2018 3:56 pm
Forum: Alignments
Topic: Alignment error in XY - using Cylinder Probe
Replies: 3
Views: 3050

Alignment error in XY - using Cylinder Probe

I'm having issues when doing alignment on any parts that are made either of thin material or sheet metal. I'm using Cylindrical tips for this purpose, making sure all are calibrated verifying them with blocks and ring gauges and the readings are OK, but when comes to measuring the parts after aligni...
by jpo_031
Mon Aug 13, 2018 12:16 pm
Forum: PH20 / I++
Topic: Head Calibration Procedure
Replies: 5
Views: 4977

Re: Head Calibration Procedure

Thanks for the heads up.
I see is in the software, so I have to update to 3.7 since the one I'm using is 3.6..
by jpo_031
Thu Aug 09, 2018 12:03 pm
Forum: PH20 / I++
Topic: Head Calibration Procedure
Replies: 5
Views: 4977

Re: Head Calibration Procedure

I Forgot to mention I'm using a PH-20 head TP-20 module ,with the 3.6 cmm mgr version. Also have this other question besides trying to calibrate the head which I'm still trying to figure out, is it better to measure thin parts like sheet metal or small machined parts disabling the PH-20 and using on...
by jpo_031
Thu Aug 09, 2018 9:17 am
Forum: PH20 / I++
Topic: Head Calibration Procedure
Replies: 5
Views: 4977

Head Calibration Procedure

Hi there. I wonder if you can walk me thru to perform the Head Cal. I'm trying to do a head calibration, the purpose is to verify the accuracy of the cmm due to a head crash during the past days, but when i go to UCC server I can see the option to calibrate the tips but i can't find anything for hea...
by jpo_031
Tue Jan 30, 2018 12:27 pm
Forum: Helmel
Topic: Tip compensatiopn in a Manual CMM
Replies: 0
Views: 3987

Tip compensatiopn in a Manual CMM

Hi there. I'm bugging you again almost with almost the same issue I've asked before, the difference is that in the previous occasion it was for a Brand new CMM (3 COORD) and with your help I was finally able to solve some of the problems, one still when calibrating on DCC I'm still having one error ...
by jpo_031
Wed Nov 29, 2017 1:15 pm
Forum: Tip Calibration / Probe config
Topic: Tip calibration error (4998)
Replies: 9
Views: 8660

Re: Tip calibration error (4998)

I've created the help desk file already for better understanding of this problem.