Search found 11 matches

by 007tda
Mon May 11, 2020 12:18 pm
Forum: General Application Support
Topic: timer to go offline(disconnect)?
Replies: 5
Views: 1044

Re: timer to go offline(disconnect)?

I would highly recommend that you try to get away from multiple users logging in to the PC. There are many functions that CMM Manager has to store properly when the software is shutdown. If you are opening multiple sessions from different user accounts or forcibly closing the active session so you c...
by 007tda
Mon Apr 27, 2020 2:23 pm
Forum: Optional Hardware & Software Modules
Topic: 3DConnexion Support
Replies: 7
Views: 4883

Re: 3DConnexion Support

Any chance this got looked at again. I am programming a lot of parts and love the 3D Connection wheels, but cannot seem to map any of the wheel controls with the current drivers, just the buttons.
by 007tda
Thu Apr 09, 2020 4:47 pm
Forum: Wenzel / Pantec
Topic: UCC Server and CMM Manager
Replies: 17
Views: 2594

Re: UCC Server and CMM Manager

One other possible condition goes back to the commissioning of the PH20. If your service provider ran this function through UCC Assist and did not correct the styli length to be exactly 12.15 it will throw the system off. The reference tip for the PH20 is a 4x12.15 and we have seen people forget to ...
by 007tda
Thu Sep 12, 2019 4:07 pm
Forum: Off Topic
Topic: System Error 3043: PERR: Position Error!{Axis}
Replies: 7
Views: 7319

Re: System Error 3043: PERR: Position Error!{Axis}

Is this error showing up right away when you try to home it out, or after it homes and you are moving it around?
by 007tda
Tue May 22, 2018 6:24 am
Forum: Vision / Video Measurement
Topic: Issues using TP
Replies: 2
Views: 3053

Re: Issues using TP

By default CMM Manager does not apply tip compensation to single point measurements. You will need to check the box for tip compensation when you are measuring a point, and you can change that default settings for a point so you don't have to keep doing this.
by 007tda
Thu Aug 25, 2016 1:21 pm
Forum: General Application Support
Topic: Cad import errror
Replies: 6
Views: 5507

Re: Cad import errror

your images show 3.5 in MM and 3.6 in Inches...Is this what you are seeing?
by 007tda
Tue Mar 10, 2015 7:43 am
Forum: UI / General Usage
Topic: Complete reference frame error
Replies: 2
Views: 4194

Re: Complete reference frame error

The default setting in CMM Manager is to show the warning if you do not have a complete alignment (Level, alignment, and origins). It is meant to prevent unexpected crashes if the something changes from part to part because it is not properly aligned. In the Preferences / General / Program Running /...
by 007tda
Wed Jan 28, 2015 10:38 am
Forum: Reporting
Topic: v3.4 - Cloud to CAD Graphical Report - Lost the Color Guide?
Replies: 14
Views: 11918

Re: v3.4 - Cloud to CAD Graphical Report - Lost the Color Gu

Under the display mode / disk display is a check box for the legend...did this get turned off?
by 007tda
Tue Jan 13, 2015 9:46 pm
Forum: Constructions
Topic: HELP - Measuring 2 cross holes as 1 for part alignment?
Replies: 8
Views: 11128

Re: HELP - Measuring 2 cross holes as 1 for part alignment?

You can also extract the points from both cylinders into clouds and then best fit a cylinder from both clouds to form a single cylinder.
by 007tda
Wed Nov 19, 2014 11:29 pm
Forum: Program / DCC Settings
Topic: Back off distance
Replies: 8
Views: 10107

Re: Back off distance

I Agree it is not working like I would expect it in does act like the backoff moves to ball center. I have a .7mm probe in a small groove and anything less than .350 for a backoff leaves the probe engaged with the surface...this is on a single point measurement and not a diameter or line ho...