Looping the point to speed up the inspection process

Luke_P
Getting Started
Getting Started
Posts: 5
Joined: Thu Aug 29, 2013 10:35 am

Re: Looping the point to speed up the inspection process

Post by Luke_P » Wed Sep 04, 2013 4:03 am

yes. my method indeed does work, it only lacks comments with the reported dimensions. so i would know which dimension is at which degree.
reference frame isn't aligned, because it was just a test program on a random part i've found in our lab, but thank you for the tip. i'll try that.
the whole point of doing this exercise was to come up with a code for measuring this kind of dimensions and if possible turn it into a lib, a macro or a template i could use later. thus saving time on writing completely new program from scratch.

Thank You for your help.

Post Reply