Page 1 of 1

Purchase Training Blocks

Posted: Thu Jan 03, 2019 1:48 pm
by CrashN8
We are happy to announce a new source for our Nikon / CMM-Manager training / demo parts.

You can find our Sculpteo storefront here Be sure to ONLY order with finish - Gray Nylon PA12 (Black) - Raw Polished (grey)

3D_IQ_part2.jpg
grey_polished_finish.jpg

The print quality from HP Multi-Jet Fusion process is incredible, the finish is similar to medium to high quality casting such as Die Cast. Here is an example of the legacy IQ part printed in full scale:

3D_IQ_part.jpg

Note - these parts are hollow, very light-weight, and will require double-sided tape, clay, hot-glue, fixture, etc. to maintain fixed location.

3D_IQ_part3.jpg