Tomelleri Arm

Post Reply
User avatar
CrashN8
Site Admin
Site Admin
Posts: 597
Joined: Thu Feb 09, 2017 4:07 pm

Tomelleri Arm

Post by CrashN8 » Tue Jun 02, 2020 9:44 am

Tomelleri Arm
Important Note - So far we have tested version no later than 3.7 SP1. We have not tested 64 bit version(s) of CMM-Manager that became available starting with version 3.8.

Must use CMM-Manager MCA I driver and TomelleriCore software

Update TCore parameter file - From Windows System Tray right click on TCore to access settings. From the Settings tab, under Parameter file #1 browse to the paramet.cms file on the USB thumb drive included with Arm.

Turn on MCA-Utilities Server - In TomelleriCore settings please check "Use MCA-Utilities Server" option as shown below:

Tomelleri_Core_settings.jpg
Restore .REG - At the bottom of the Diagnostics tab click button [Restore .REG] then browse to the .reg file on the USB drive mentioned above.

Shut the entire system down and restart.

CMM-Manager Machine Setup - The Arm Utility Path needs to be the file path to Tomelleri's TCore software and not MCA Utilities.

For iOS / Mobile device click here to download the PDF file.

It appears you don't have a PDF plugin for this browser... you can click here to download the PDF file.

You do not have the required permissions to view the files attached to this post.

Post Reply