Function Command String

Post Reply
Josh
User
User
Posts: 13
Joined: Thu Jul 09, 2015 12:28 pm

Function Command String

Post by Josh » Sat Sep 26, 2015 7:58 am

Does anyone have a list of old FLB commands that can be used in the function command string inside of CMM Manager. For example, BZ3,9 will make my CMM buzz at a certain point in the program to alert the operator to flip a part over, or to place the part on the fixture.

User avatar
US_Helpdesk
Moderator
Moderator
Posts: 1087
Joined: Wed Feb 23, 2011 7:26 pm

Re: Function Command String

Post by US_Helpdesk » Sat Sep 26, 2015 2:08 pm

I think there must be some documentation from Sheffield... Also please search for your answer in the future - viewtopic.php?f=6&t=736
I've migrated to a new user account, see my other posts here

User avatar
BTyler
Nikon
Nikon
Posts: 15
Joined: Fri Feb 25, 2011 9:22 am

Re: Function Command String

Post by BTyler » Mon Sep 28, 2015 8:44 am

I think this is it, the MLB Manual. Looking into this, I found the following note:

"Function Library - FLB
The Function Library has been renamed to the Measurement Library (MLB) for the
DirectInspect™ and MeasureMax+ products. It is library of special functions, commands and
variables to help you measure and inspect parts."
You do not have the required permissions to view the files attached to this post.

Post Reply