Page 1 of 1

Function Command String

Posted: Sat Sep 26, 2015 7:58 am
by Josh
Does anyone have a list of old FLB commands that can be used in the function command string inside of CMM Manager. For example, BZ3,9 will make my CMM buzz at a certain point in the program to alert the operator to flip a part over, or to place the part on the fixture.

Re: Function Command String

Posted: Sat Sep 26, 2015 2:08 pm
by US_Helpdesk
I think there must be some documentation from Sheffield... Also please search for your answer in the future - viewtopic.php?f=6&t=736

Re: Function Command String

Posted: Mon Sep 28, 2015 8:44 am
by BTyler
I think this is it, the MLB Manual. Looking into this, I found the following note:

"Function Library - FLB
The Function Library has been renamed to the Measurement Library (MLB) for the
DirectInspectâ„¢ and MeasureMax+ products. It is library of special functions, commands and
variables to help you measure and inspect parts."