UCDBW.dll/UCDBW.sys (ComUC-PCI) need to be present in the system32 and system32\Drivers folders respectively
Instructions to register Renishaw scanning probe calibration DLL to make it work with CMM-Manager on 3rd party controllers with scanning probe - Download and install new Scanning SDK .msi here
PHC’s default PAD = 4 when used with Mitutoyo CMM but could revert to 26 on some Windows 7 PC’s and latest NI 488.2 software.
64 bit ComUC Card Drivers:
CMM-Manager (64 or 32 bit) communicates to 32bit “UCDBW.DLL” which needs to be copied to the following location:
If on a Windows 64bit OS
If on a Windows 32bit OS
Also the “UCDBW.INI” file needs to be copied to the same location as “UCDBW.DLL” as this file is read by UCDBW.DLL.
Note: Do not supply newer HP desktop with Mitutoyo ComUC / we suggest Dell t5810 workstation or Dell Precision 3630
- I suspect HP is not working when this type of PCI expansion slot is in place - PCI Expansion Slot Kit
For iOS / Mobile device click here to download the PDF file.