Help Plz. Defining a Pierce Point to measure True Pos of angled hole on an tapered inner diameter of a round part...

Post Reply
cward2010
New User
New User
Posts: 1
Joined: Thu Mar 07, 2019 5:25 pm

Help Plz. Defining a Pierce Point to measure True Pos of angled hole on an tapered inner diameter of a round part...

Post by cward2010 » Thu Mar 07, 2019 5:35 pm

Anybody figured out how to... Defining a Pierce Point to measure True Position of an angled hole on a tapered inner diameter of a round part...

Basically ID holes normal to a cone and the drawing calls out a pierce point from 3 datum's other than the PP. a Face, Thru Bore (perpendicular to the face) and an indexing hole for clocking.

I can visualize and can create the point just don't know how to generate a inspection report with TP of the hole...

Any help would be greatly appreciated!

Thanks,

Casey

Post Reply